P.H
The ability of your products to work effectively.
How to Add to Pool: Broadcast to deep end of pool. Do not add w/in 12hrs of an
alkalinity adjustment or shock treatment.
Alkalinity
The buffer for your pH.
How to Add to Pool: Broadcast to deep end, but never more than 5lbs a time, allowing
30mins between each dosage. Do not add w/in 12hrs of a pH adjustment or shock treatment.
Chlorine
The preferred sanitizer of pools.
How to Add to Pool: 3” tablets dispensed in floaters or an in-line chlorine feeder
Cal Hypo Shock
The most powerful and fast-acting shock available
How to Add to Pool: carefully sprinkle the granular product evenly around the pool perimeter while the filter is running
_edited_.png)
Stabilizer
Helps to prevent chlorine loss due to intense sunlight!
How to Add to Pool: Use if intense sunlight causes difficulty in maintaining chlorine residual.The ideal range for a non-salt water pool is 20-25 ppm.
Clarifier
Removes suspended particles from your water!
How to Add to Pool: Add Required Dosage to the back of a watering can. Pour into pool at the point of maximum agitation. Run pool filter for 8 hours then vacuum residual.
_edited_.png)
Phosphate Remover
Enhance water chemistry by removing phosphates!
How to Add to Pool: After balancing your pool water, Apply Product directly to pool water with circulation and filtration system for 24 hours.
Stain & Scale
Removes metals from your pool water!
How to Add to Pool: After Balancing the P.H, Initially treat pool with 16 ounces Per 10,000 Gallons. Add product while pump is operating.
Bio-Cleanse
All natural product to digest non-organic contaminates!
How to Add to Pool: After balancing your pool water, Apply Product directly to pool water with circulation and filtration. Use 4 ounces per week. Avoid shock for 24 hours.